KWTV Setup Help
🔄 How to Update the Server Address in TiviMate
Your Service has transferred, and now you need to update the server address inside your TiviMate playlist settings. Follow the steps below to swap in the new URL and refresh everything properly.
📺 Step-by-Step Instructions
Open TiviMate and follow these steps carefully:
1
Open TiviMate
Launch the app on your TV device.
Launch the app on your TV device.
2
Go to Settings
Select the settings gear icon.
Select the settings gear icon.
3
Select Playlists
Open the playlist section.
Open the playlist section.
4
Choose Your KWTV Playlist
Tap the playlist you want to update.
Tap the playlist you want to update.
5
Open Xtream Codes Parameters
This is where your server address is stored.
This is where your server address is stored.
🌐 New Server Address
Replace the current Server Address with the new one below. Keep your username and password the same unless you were told otherwise.
https://blueonesuperoceanhere.com
✅ After updating the URL, save your changes by hitting Apply or OK.
💾 Refresh the Playlist
Once the new server address is entered and saved, back out to the playlist area and run a manual refresh.
6
Save the Change
Press Apply or OK.
Press Apply or OK.
7
Update Playlist
Run Update Playlist so channels and guide data reload.
Run Update Playlist so channels and guide data reload.
🚀 Best Settings to Turn On
For the smoothest experience, make sure these playlist options are enabled:
- Update on App Start = ON
- Update Interval = 4 hours
- Make sure the server address starts with https://
🛠️ Still Not Working?
Try these quick troubleshooting steps before reaching out:
- Restart your device from settings instead of unplugging it.
- Restart your Wi-Fi/router to clear connection issues.
- Use a VPN if needed and try switching protocols.
⚠️ If channels are still stuck or offline after updating the server address, it is usually a connection issue, an outdated playlist, or a device/app refresh problem.